The complete process of Styrofoam recycling includes collection, classification, cleaning, compaction, granulation, and reuse, among which Styrofoam densifier is an indispensable equipment. This foam recycling machine can compress loose Styrofoam at a ratio of 90:1, which can greatly improve the ability of subsequent transportation and space management.

Meanwhile, the operation of this Styrofoam densifier is very simple, and the worker is only required to press the start/stop button. The high compression and easy operation are the main reasons that this foam recycling machine is more favored by consumers than cold-press compactors and hydraulic compactors in the market.

INTCO Recycling will explain to you the daily operation instructions of its sub-brand GREENMAX Styrofoam densifier, realizing smoother Styrofoam recycling.

Preparation

Working environment: Foam recycling machine is best placed in a ventilated environment to prevent dust accumulation and affect the working efficiency of the machine.

Protection work: Workers need to wear protective equipment such as goggles, safety helmets, safety gloves, etc. to ensure safety during the foam boxes recycling process.

Machine inspection: Before starting the Styrofoam densifier, it is necessary to check the various parts of the machine to avoid safety accidents in Styrofoam recycling. For example, check whether the power supply is stable and whether the pipe connection is sealed.

Styrofoam densifier use

Start-up: The staff will start the machine according to the requirements of the operating instructions. Usually, it is necessary to press the power button and make some initialization settings.

Compression mode selection: Generally speaking, INTCO Recycling will set the matching foam compression mode for customers to choose based on a deep understanding of the customer's materials before the Styrofoam densifier leaves the factory. Customers can consult INTCO Recycling's engineers to make subtle adjustments to the parameters or add a new set of compression modes according to the actual compression effect. This can help customers achieve the simplest Styrofoam recycling.

Feeding: The staff will first classify the foam and remove contaminants such as surface tape and stickers, and then the foam can be put into the foam recycling machine. Be careful to avoid feeding too much at one time, which will cause the Styrofoam densifier to be blocked or overloaded.

Temperature control: GREENMAX Styrofoam densifier uses high-temperature hot melting technology to perform foam boxes recycling, so the machine must maintain a stable temperature. If the temperature fluctuates greatly, it is necessary to adjust the equipment immediately or stop the machine and check it.

Wrapping and taking out: After the compression work is completed, the Styrofoam densifier will squeeze the foam into the container and foam ingots will be solidified quickly. The staff can use some tools to organize the foam ingots and take them out after solidification and place them on the pallet.

Daily maintenance

Cleaning after use: After the Styrofoam recycling is completed, the staff is advised to clean the machine and the site, which can not only maintain the 5S of the factory, but also prevent the foam residue from blocking the foam recycling machine and causing other damage.

Machine maintenance: Regularly check the various parts of the Styrofoam densifier, especially the vulnerable parts, and repair them in time. Lubricate and maintain the machine according to the instruction manual, so that the service life of the foam recycling machine can be maintained longer.