After being recycled, white foam can be made into recycled polystyrene particles. This material can be used in many places in life, such as building insulation, TV casings, etc. However, white foam is more difficult to recycle than used cardboard boxes. Only by using professional recycling equipment can we recycle white foam in an environmentally friendly and scientific way. In fact, it is not just EPS foam that can be used to make plastic particles. The familiar EPE foam can also be made into plastic particles. People often have a misunderstanding that only compressed foam can be granulated. In fact, this is not the case. Loose foam can also be directly made into plastic particles. Currently, GREENMAX, an equipment company under INTCO Recycling, provides two foam granulators. Used to make plastic particles.

Foam granulator for EPS particles
The EPS foam granulator is a professional machine used to make EPS plastic particles. The EPS waste material enters the foam granulator crushing chamber and is broken into small pieces. After the EPS foam fragments pass through the hot melt device, they are melted, transported, extruded by the screw, and pulled out into long pieces. The wire is then cooled in a water tank and cut into uniformly sized plastic particles.

Foam granulator for EPE particles

The working principle of EPE foam granulator is almost the same as that of EPS foam granulator. It is also a professional machine used to make EPE plastic particles. The originally bulky and loose EPE foam can be made into high-quality EPE plastic particles.

Can you make considerable profits by using EPE granulator to make plastic particles?

The answer is yes, especially as the granulation industry has continued to develop in recent years. The types of granulation are no longer limited to EPS particles. One of INTCO Recycling's customers is engaged in the insulation board cutting industry in Saudi Arabia. Among them is EPS insulation board waste. This customer first uses equipment to compress EPS and then pellets it. In fact, if you find the source of the waste in time and have the need for granulation, you can use loose waste to directly granulate it. , which is more efficient. Customers said that currently using recycled materials for granulation is a very objective project and has also brought huge profits to the factory.

If you are interested in foam granulator or have any questions about the granulation process, you can contact INTCO Recycling at any time.